With the change of generations of mainstream consumers in the home market, the demand for overall solutions on the consumer side is becoming more and more strong, and the acceptance of assembly decoration and digital living is increasing. As a new species in the large residential field, prefabricated interior has received widespread attention since 2018. Various companies have sprung up to the market, showing a thriving business format.

Assembly decoration is an important force in the future of the decoration industry and even the large residential industry. It has changed the underlying logic of decoration and brought the decoration industry into a new era of standardization, industrialization and even process control through digital means.

Assembly decoration development drive

Assembled decoration refers to the decoration and construction mode that follows the principle of separation of pipelines and structures, uses integrated design methods to coordinate partition walls and wall systems, suspended ceiling systems, floor systems, kitchen systems, toilet systems, storage systems, internal door and window systems, equipment and pipeline systems, etc., and mainly uses dry methods to carry out construction and installation of factory-produced parts and components.

Compared with traditional decoration, prefabricated decoration has obvious advantages in construction efficiency, site management, health and environmental protection, and industrial production and prefabricated construction have significantly improved the efficiency of project delivery and renovation and reinstallation.

In recent years, with calcium silicate board as the base material, the Chinese material Hankun decorative board produced by Sinoma (Qianjiang) Energy Saving New Material Co., Ltd. is widely used in the subdivision of wall panel decoration for assembly decoration.

Sinoma Hankun Decorative Board Product Description

The Chinese material Hankun decorative board is made of decorative layer and inorganic core material high-density calcium silicate board by high temperature and high pressure. It is a kind of green environmental protection material with non-combustible, low formaldehyde emission, easy cleaning and other characteristics. It is mainly used in wall decoration in buildings with high requirements for fire prevention and environmental protection.

regular product specifications

Installation method

1, wall paste method (4/6mm plate)

The wall paste method requires a high degree of smoothness of the wall.

Before pasting, the wall surface must be leveled to ensure that the flatness deviation of the wall surface shall not be greater than 2mm;

After leveling the wall surface, double-sided adhesive and structural adhesive shall be pasted on the back of the Chinese material Hankun decorative board. The distance between the structural adhesive shall not exceed 100mm and the distance between the double-sided adhesive shall not exceed 200mm.

2. Keel paste method (4/6mm plate)

Before installing the keel, the wall surface shall be measured, the maximum tolerance shall be found out, and then the elastic line shall be used for positioning. The upper and lower deviation of the keel shall not be greater than 2mm; The spacing between vertical keels shall be controlled within 400mm; Oxidation treatment must be carried out; When the keel is fixed, its firmness and flatness shall be ensured. Before laying glue, the keel surface shall be cleaned to ensure no ash-free, the distance of structural adhesive shall not exceed 100mm, and the distance of double-sided adhesive shall not exceed 200mm.

3. Keel dry hanging method (6/8mm plate)

Before installing the keel, the wall surface shall be measured and the maximum tolerance shall be found out. When the elastic line positioning and the vertical flatness error of the wall are greater than 5mm, galvanized square pipes shall be used for leveling and backing. The vertical and horizontal keels shall be arranged according to the node diagram. The keel spacing shall not exceed 400mm. The keel surface shall be cleaned before glue laying to ensure no ash stain pollution. As shown in the figure, the structural glue distance shall not exceed 100mm and 200mm, the boards are fixed with profiles, and structural glue or decorative strips are used for caulking at the flat-laid joints.

Application areas

Used in hospitals, laboratories, schools, office buildings, subway tunnels and other commercial and public space wall decoration.

Sinoma Hankun Decorative Board

The inflection point of residential upgrading is coming step by step, from food and clothing to a well-off society, and the people's requirements for housing have also changed. The post-90s and post-00s no longer pay attention to what decoration materials are, but pay attention to health, environmental protection, safety, comfort and beauty. At the same time, they also have higher requirements for efficiency and convenience. Carrying a bag is more in line with the consumption concept of this generation, there is no need to consume too much time and energy in the decoration process.

Policy to promote market-oriented demand, medium material Hankun decorative plate blue sea market can be expected. Especially with the assembly-type construction industry in the early stage of development by the policy-driven impact is more obvious, after a certain scale effect, the medium material Hankun decorative board with the scale effect of assembly-type decoration, the trend of replacing traditional decoration materials is irreversible, the medium material Hankun decorative board will become a market-oriented choice. With the gradual maturity of the industrial chain, the medium material Hankun decorative board with assembly decoration as the carrier will achieve faster demand growth.

Sinoma (Qianjiang) Energy-saving New Materials Co., Ltd. has an annual production capacity of 2 million square meters of high-end Sinoma Hankun decorative panels, and its production scale ranks first in Central China. This product is a high-end functional decorative plate made of high-end calcium silicate board produced by Sinoma (Yichang) Energy Saving New Material Co., Ltd. as the base material and combined with the decorative layer.

As a member of the world's top 500 China Building Materials Group, the company adheres to the business philosophy of "integrity-based, excellent quality, continuous innovation, and win-win cooperation", strengthens R & D innovation, highlights quality benefits, and creates excellent performance, making the company an investor and society A platform shared with employees is committed to becoming a developer and service provider with global influence in the field of new materials, new technologies and new products.